CLIP PINCERS

This type of rebar support Works under the same parameters of his brother the Clip Mortar, but with the difference that this product has a special clip that allows for thin caliber rebar or mesh to be correctly secured (down from 3mm up to ¼”).

  Our_concrete_made_bar_separators_offer_a_higher_resistance_and_a_less_consumption

Steel is getting more expensive every day so the use of lower caliber mesh in the construction industry is becoming more common place, this is especially prevalent in hydraulic works and post tensing elements.

   spacers_for_small_caliber_rebars  Plastic_rebar_spacers_do_not_guarantee_the compliance_with_the_technical_rules_set_in_reinforce.

Our Clip Pincer spacer is very versatile , just as the Clip Mortar it can be used horizontally as well as vertically. Available recover heights go from 20mm (3/4”) up to 75mm (3”).


The necessity for patching procedures is eliminated thanks to its lower cavities that allow the fresh concrete to flow through them, enveloping the element and making it an integral part of the floor.


Usage is estimated at 1.5 units per square meter.

Clip Pincer Information Video
Clip Pincer Installation Manual

You are an important part in the task to correctly position your rebar, following these simple instructions for distributing evenly your Atecon Spacers throughout your construction site will guarantee that the correct recover height is achieved.

 

DOWNLOAD INSTALLATION MANUAL

Technical Specifications

Download here the technical data sheet for this type of Bar Positioner, for any additional information, please contact us at any moment.

Download 

Compression Strength

Check for yourself the high resistance under great loads of our Mortar based Spacers, with this comprehensive compression test made by independent laboratories

Compression Test Mexico

ATECON © 2017